Set-Up Templates
INSTRUCTIONS FOR USE
The curved set-up templates are used for setting up full dentures according to the occlusion curves of Spee and Wilson. Once they are on the template holder, the templates are adjustable in inclination, and in the horizontal and vertical planes. The flat template can be used as an orientation guide for average-value mounting of the mandible. The part number for the Splitex (magnetic) version of the template holder is 46260.
|
Template Radius |
Part # |
Cusp Degrees |
Type of Tooth |
Manufacturer |
|
100 mm |
47741 |
0 |
WeroLux, Polystar |
Werchan |
|
|
|
|
Biodent, Articon, |
De Trey |
|
125 mm |
47742 |
15-16 |
Orthognat, |
Lindau Teeth |
|
|
|
|
n, t, k, Odilux |
Ivoclar, Weithaas |
|
140 mm |
47744 |
25-28 |
Cuspiform |
Vita |
|
160 mm |
47746 |
30-35 |
Othocal |
Lindau Teeth |
|
Flat |
47740 |
|
|
|
1. Attach the magnetic template holder to the magnet on the upper
arm of the articulator.
2. Choose the appropriate template by radius desired, or choose
the flat template for average-value mounting.
3. Loosen the screw on the template holder, slide the template on,
and tighten the screw.
4. Loosen the T-clamp and align the curved template on the lower
bite block.
5. Tighten the T-clamp and set up the teeth.
Revision 0, 3/19/99